Crescent moon disc cutter set seen from above, four crescent-shaped punches seated in the steel plate beside two screws

Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool

£99.99
Skip to product information
Crescent moon disc cutter set seen from above, four crescent-shaped punches seated in the steel plate beside two screws
  • Crescent moon disc cutter set seen from above, four crescent-shaped punches seated in the steel plate beside two screws
  • Crescent moon disc cutter set angled, four crescent punches of different sizes standing in the steel die block
  • Crescent moon disc cutter set from the other side, the four crescent punches in the block with the sheet slot and screws
  • Crescent moon disc cutter set dimension drawing of the four crescents, from 19.06 by 20.15 mm down to 10.6 by 11.2 mm
  • Crescent moon disc cutter set seen from above, four crescent-shaped punches seated in the steel plate beside two screws
  • Crescent moon disc cutter set angled, four crescent punches of different sizes standing in the steel die block
  • Crescent moon disc cutter set from the other side, the four crescent punches in the block with the sheet slot and screws
  • Crescent moon disc cutter set dimension drawing of the four crescents, from 19.06 by 20.15 mm down to 10.6 by 11.2 mm
Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
SKU: VN-S803-EK4G

Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool

£99.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging

This disc cutter set allows you to punch four distinct sizes of crescent moon shapes from non-ferrous metal sheet. The set includes a solid steel die block and four corresponding punches, each machined from hardened carbon tool steel for clean, repeatable cuts.

To use, slide your sheet metal (up to 18 gauge) into the die, insert the correct punch, and strike firmly with a mallet. The four crescent sizes are 10.6x11.2mm, 13.69x14.47mm, 16.36x17.29mm, and 19.06x20.15mm. Using a cutting lubricant will prolong the life of the cutting edges.

This tool is ideal for creating celestial-themed jewellery components, decorative inlays for model making, or producing consistent blanks for stamping and enamelling.

  • Four crescent punches: 10.6x11.2mm, 13.7x14.5mm, 16.4x17.3mm, and 19.1x20.2mm.
  • Block and punches are machined from hardened high-carbon tool steel.
  • Cuts non-ferrous metals like silver and copper up to 18 gauge (1.02mm).
  • The solid steel die block measures 63.5 x 89 mm (2.5 x 3.5 inches).
  • Each punch is approximately 38mm (1.5 inches) long with a bevelled striking end.

Is this the right tool for you?

Best for

  • UK jewellers producing celestial-themed collections in silver or gold sheet.
  • Model makers creating custom decorative metal components and inlays.
  • Crafters needing to create consistent crescent blanks for enamelling or stamping.
  • Repair technicians fabricating small, custom-shaped non-ferrous parts.

Not for

  • Cutting hardened steel or any ferrous metals thicker than 24 gauge.
  • Punching materials thicker than 18 gauge (1.02mm) non-ferrous sheet.
  • Use with a standard claw hammer – a brass or nylon mallet is required.
  • Creating shapes other than the four specified crescent moon sizes.

How this compares

Crescent Moon Steel Disc... Alternatives
Material Hardened high-carbon tool steel Untempered carbon steel
Punch Fit Punches machined to match die slots Loose tolerances, burred edges
Max Thickness Rated for 18 gauge (1.02mm) non-ferrous Unspecified, or only for thin foils
Country of stock UK stock Overseas dispatch

You may also like
Related guides

Further reading from Toolsmith