Casting & Lost-Wax Tools

Tools for melting, casting and lost-wax work at the jewellery bench: ceramic (fused silica) and graphite crucibles, crucible and pouring tong sets, cast iron ingot moulds for bars, sheet and wire, perforated stainless steel flasks for vacuum casting, crucible and flask tongs in lengths up to 26 inches, aluminium mould frames for vulcanised rubber moulds, sand casting mould rings for Delft clay and Petrobond, and a graphite stirring rod.

New to casting? Start with our Lost-Wax Casting for Beginners UK buying guide and the bench fire safety guide. Wax carvers and wax files are in Wax Carving Tools.

Casting and lost-wax tools for melting and pouring at the jewellery bench: crucibles and tongs, cast iron ingot moulds, perforated flasks for vacuum casting, mould frames and sand casting rings. For bigger trees there is an X-large 5 x 7 inch heavy-duty casting flask; to pour scrap into wire and rod, the double-sided 6-in-1 ingot mould gives six profiles in one cast iron block; and for Delft clay or Petrobond there are 60 mm aluminium sand casting mould rings. For joining parts after casting, see our soldering equipment for jewellery.

Skip to results list

Active filters:

45 items
Column grid
Column grid

Filter

Active filters: