Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool

Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool

£99.99
£99.99
Skip to product information
Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
  • Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool
SKU: VN-S803-EK4G

Crescent Moon Steel Disc Cutter Set, 4 Punches, 10-21 mm, Jewellery Making Tool

£99.99
£99.99
In stock — ships from our UK warehouse
Order in — for same-day dispatch
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Dispatched todayIf ordered before 2pm
30-day returnsNo arguments

This disc cutter set allows you to punch four distinct sizes of crescent moon shapes from non-ferrous metal sheet. The set includes a solid steel die block and four corresponding punches, each machined from hardened carbon tool steel for clean, repeatable cuts.

To use, slide your sheet metal (up to 18 gauge) into the die, insert the correct punch, and strike firmly with a mallet. The four crescent sizes are 10.6x11.2mm, 13.69x14.47mm, 16.36x17.29mm, and 19.06x20.15mm. Using a cutting lubricant will prolong the life of the cutting edges.

This tool is ideal for creating celestial-themed jewellery components, decorative inlays for model making, or producing consistent blanks for stamping and enamelling.

  • Four crescent punches: 10.6x11.2mm, 13.7x14.5mm, 16.4x17.3mm, and 19.1x20.2mm.
  • Block and punches are machined from hardened high-carbon tool steel.
  • Cuts non-ferrous metals like silver and copper up to 18 gauge (1.02mm).
  • The solid steel die block measures 63.5 x 89 mm (2.5 x 3.5 inches).
  • Each punch is approximately 38mm (1.5 inches) long with a bevelled striking end.

Is this the right tool for you?

Best for

  • UK jewellers producing celestial-themed collections in silver or gold sheet.
  • Model makers creating custom decorative metal components and inlays.
  • Crafters needing to create consistent crescent blanks for enamelling or stamping.
  • Repair technicians fabricating small, custom-shaped non-ferrous parts.

Not for

  • Cutting hardened steel or any ferrous metals thicker than 24 gauge.
  • Punching materials thicker than 18 gauge (1.02mm) non-ferrous sheet.
  • Use with a standard claw hammer – a brass or nylon mallet is required.
  • Creating shapes other than the four specified crescent moon sizes.

How this compares

Crescent Moon Steel Disc... Alternatives
Material Hardened high-carbon tool steel Untempered carbon steel
Punch Fit Punches machined to match die slots Loose tolerances, burred edges
Max Thickness Rated for 18 gauge (1.02mm) non-ferrous Unspecified, or only for thin foils
Country of stock UK warehouse Overseas dispatch

You may also like