Flying eagle disc cutter set, steel block with the 4 bird-shaped punches sitting in place, angled view

Flying Eagle Steel Disc Cutter Set, 4 Punches, 8-25 mm, Jewellery Making Tool

£99.99
Skip to product information
Flying eagle disc cutter set, steel block with the 4 bird-shaped punches sitting in place, angled view
  • Flying eagle disc cutter set, steel block with the 4 bird-shaped punches sitting in place, angled view
  • Flying eagle disc cutter set, the block from the other side showing the punches and the slot for sheet metal
  • Flying eagle disc cutter set, top view of the block with the 4 bird-shaped punches and two guide holes
  • Flying eagle disc cutter set dimension drawing of the 4 bird blanks, from 13.88 mm to 24.94 mm wide
  • Flying eagle disc cutter set, steel block with the 4 bird-shaped punches sitting in place, angled view
  • Flying eagle disc cutter set, the block from the other side showing the punches and the slot for sheet metal
  • Flying eagle disc cutter set, top view of the block with the 4 bird-shaped punches and two guide holes
  • Flying eagle disc cutter set dimension drawing of the 4 bird blanks, from 13.88 mm to 24.94 mm wide
Flying Eagle Steel Disc Cutter Set, 4 Punches, 8-25 mm, Jewellery Making Tool
SKU: 7U-V5HZ-AM2D

Flying Eagle Steel Disc Cutter Set, 4 Punches, 8-25 mm, Jewellery Making Tool

£99.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging

This disc cutter set produces four sizes of a detailed flying eagle shape from soft sheet metal. The set includes a solid steel die block and four matching punches, each machined from tempered high-carbon tool steel to create and hold a sharp cutting edge.

To use, slide your sheet metal into the appropriate slot on the 76 mm square block, insert the corresponding punch, and strike it firmly with a mallet or hammer. The four punch sizes are 24.94 x 15.61 mm, 20.84 x 13 mm, 16.97 x 10.63 mm, and 13.88 x 8.66 mm. For the cleanest cuts and to prolong the life of the tool, we recommend using a cutting lubricant and working with annealed metal.

This tool is ideal for jewellers creating themed collections, silversmiths making pendants or earrings, or crafters needing consistent, detailed shapes for decorative metalwork.

  • Cuts four distinct flying eagle shapes from non-ferrous sheet metal.
  • Punch sizes (approx): 24.9x15.6, 20.8x13, 17x10.6, and 13.9x8.7 mm.
  • Made from tempered high-carbon tool steel for durable cutting edges.
  • Solid 76 x 76 mm (3 x 3 inch) steel block provides a stable cutting base.
  • For soft metals up to 18 gauge (1.02 mm) like silver, copper, and brass.

Is this the right tool for you?

Best for

  • UK jewellers creating themed collections with bird or wildlife motifs
  • Silversmiths producing small batches of silver or copper eagle pendants
  • Model makers needing consistent, detailed shapes for custom projects
  • Crafters working with aluminium or brass sheet for decorative metalwork

Not for

  • Cutting hardened steel or metals thicker than 18 gauge (1.02 mm)
  • High-volume production runs; this is a manual bench tool
  • Use without a sturdy bench block and appropriate hammer

How this compares

Flying Eagle Steel Disc... Alternatives
Material Tempered High-Carbon Tool Steel Untempered low-grade carbon steel
Edge Finish Ground sharp for clean cuts Rough stamped or cast edges
Block Mass 1.2 kg solid steel Lighter, less stable alloy block
Country of stock UK stock Overseas dispatch

You may also like
Related guides

Further reading from Toolsmith