Maple leaf steel disc cutter set seen from above, three maple leaf punches sitting in the square die block

Maple Leaf Steel Disc Cutter Set, 3 Punches, 13-25 mm, Jewellery Making Tool

£99.99
Skip to product information
Maple leaf steel disc cutter set seen from above, three maple leaf punches sitting in the square die block
  • Maple leaf steel disc cutter set seen from above, three maple leaf punches sitting in the square die block
  • Maple leaf steel disc cutter set, angled view of the two-layer die block with the three punches standing in it
  • Maple leaf steel disc cutter set from the other side, showing the slot between the plates and the hex screws
  • Maple leaf disc cutter dimension drawing: three leaf shapes measuring 13.98 x 18.25, 17.01 x 21.61 and 19.9 x 24.71 mm
  • Maple leaf steel disc cutter set seen from above, three maple leaf punches sitting in the square die block
  • Maple leaf steel disc cutter set, angled view of the two-layer die block with the three punches standing in it
  • Maple leaf steel disc cutter set from the other side, showing the slot between the plates and the hex screws
  • Maple leaf disc cutter dimension drawing: three leaf shapes measuring 13.98 x 18.25, 17.01 x 21.61 and 19.9 x 24.71 mm
Maple Leaf Steel Disc Cutter Set, 3 Punches, 13-25 mm, Jewellery Making Tool
SKU: VJ-AW8S-456G

Maple Leaf Steel Disc Cutter Set, 3 Punches, 13-25 mm, Jewellery Making Tool

£99.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging

This disc cutter set produces clean, repeatable maple leaf shapes from sheet metal. The set includes a solid 64 x 89 mm die block and three corresponding punches, all machined from hardened and tempered tool steel for durability and edge retention.

To operate, place your annealed non-ferrous metal sheet (up to 18 gauge or 1.02 mm) into the die. Select your punch—24.71 mm, 21.61 mm, or 18.25 mm tall—and insert it into the matching slot. A firm strike with a brass hammer will shear a precise blank. We recommend using a cutting lubricant to ensure a clean cut and extend the tool's life.

Ideal for creating consistent components for jewellery such as pendants and earrings, or for adding detailed metalwork to models and craft projects.

  • Cuts three distinct maple leaf blanks from non-ferrous sheet metal up to 18 gauge.
  • Block and punches are machined from hardened and tempered high-carbon tool steel.
  • Includes three punch sizes: 24.7mm, 21.6mm, and 18.3mm (approximate height).
  • The solid steel die block measures approximately 64 x 89 mm (2.5 x 3.5 inches).
  • Use with a brass hammer and cutting fluid to prolong the life of the cutting edges.

Is this the right tool for you?

Best for

  • UK jewellers producing series of maple leaf pendants or earrings
  • Silversmiths needing consistent decorative elements for larger pieces
  • Model engineers creating custom brass or copper insignia and details
  • Crafters working with non-ferrous metal sheet for bespoke designs

Not for

  • Cutting hardened steel or metals thicker than 18 gauge (1.02 mm)
  • Use with a steel hammer, which can damage the punch heads
  • Freehand stamping; this is a die-and-punch shearing tool
  • Cutting multiple sheets at once

How this compares

Maple Leaf Steel Disc... Alternatives
Material Hardened & Tempered Tool Steel Untempered Carbon Steel
Edge Finish Precision ground cutting edges Rough cast or stamped edges
Block Stability Solid 1.5 kg steel block Lighter, less stable block
Country of stock UK stock Overseas dispatch

You may also like
Related guides

Further reading from Toolsmith