Spinning top disc cutter set, top view of the steel die block with the four spinning-top punches in place

Spinning Top Steel Disc Cutter Set, 4 Punches, 10-25 mm, Jewellery Making Tool

£99.99
Skip to product information
Spinning top disc cutter set, top view of the steel die block with the four spinning-top punches in place
  • Spinning top disc cutter set, top view of the steel die block with the four spinning-top punches in place
  • Spinning top disc cutter set, angled view of the two-part die block with the four punches standing in it
  • Spinning top disc cutter set, die block from the other side showing the hex screws and alignment pins
  • Spinning top disc cutter set, dimension drawing with the four punch faces and their sizes in millimetres
  • Spinning top disc cutter set, top view of the steel die block with the four spinning-top punches in place
  • Spinning top disc cutter set, angled view of the two-part die block with the four punches standing in it
  • Spinning top disc cutter set, die block from the other side showing the hex screws and alignment pins
  • Spinning top disc cutter set, dimension drawing with the four punch faces and their sizes in millimetres
Spinning Top Steel Disc Cutter Set, 4 Punches, 10-25 mm, Jewellery Making Tool
SKU: G0-99CA-NMFK

Spinning Top Steel Disc Cutter Set, 4 Punches, 10-25 mm, Jewellery Making Tool

£99.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging

This disc cutter set produces clean, repeatable spinning-top shapes from non-ferrous metal sheet. The set includes a solid steel die block and four matching punches, all machined from hardened and tempered tool steel to maintain a sharp cutting edge.

To operate, slide your metal sheet (up to 18 gauge / 1.02 mm) into the die block, position the corresponding punch into the aperture, and strike it firmly with a brass or nylon mallet. Using a suitable cutting lubricant will ensure a cleaner cut, reduce burrs, and prolong the life of the punches.

This tool is used by jewellers and metal crafters to create components for pendants, unique earring drops, and other decorative elements from silver, gold, copper, and brass sheet.

  • Cuts four distinct spinning-top shapes from non-ferrous sheet metal up to 18 gauge (1.02 mm).
  • Block and punches are machined from hardened and tempered high-carbon tool steel for durability.
  • Includes four punch sizes: 10.27x15.97, 12.84x19.14, 15.4x22.29, and 16.9x24.92 mm.
  • The solid steel die block measures approximately 64 x 89 mm (2.5 x 3.5 inches).
  • Each punch is approximately 38 mm long with a sharp cutting edge and a beveled striking end.

Is this the right tool for you?

Best for

  • UK bench jewellers producing consistent shaped blanks for earrings or pendants
  • Silversmiths needing to cut custom shapes from silver or copper sheet up to 1.02 mm
  • Crafters and makers working with non-ferrous metals for decorative metalwork

Not for

  • Cutting hardened steel or sheet thicker than 18 gauge (1.02 mm)
  • Use with a steel hammer, which can damage the punches; use a brass or nylon mallet
  • Creating perfectly circular discs; this tool cuts a specific 'spinning top' shape

How this compares

Spinning Top Steel Disc... Alternatives
Material Hardened & Tempered Carbon Tool Steel Softer, unhardened steel
Punch Finish Ground cutting edges for a clean shear Rough-cast edges causing burrs
Die Block Solid steel block with precise apertures Lighter block prone to movement
Stock Location UK stock, dispatched from the UK Dispatched from overseas

You may also like
Related guides

Further reading from Toolsmith