Dolphin disc cutter set, steel die block at an angle with the 3 dolphin-shaped punches seated in it and two hex screws

Dolphin Steel Disc Cutter Set, 3 Punches, 6-27 mm, Jewellery Making Tool

£99.99
Skip to product information
Dolphin disc cutter set, steel die block at an angle with the 3 dolphin-shaped punches seated in it and two hex screws
  • Dolphin disc cutter set, steel die block at an angle with the 3 dolphin-shaped punches seated in it and two hex screws
  • Dolphin disc cutter block seen from directly above, the 3 dolphin punches in small, medium and large sizes
  • Dimension drawing of the 3 dolphin blanks in mm, 26.60 x 14.40, 20.57 x 11.14 and 11.33 x 6.13
  • Dolphin disc cutter set, steel die block at an angle with the 3 dolphin-shaped punches seated in it and two hex screws
  • Dolphin disc cutter block seen from directly above, the 3 dolphin punches in small, medium and large sizes
  • Dimension drawing of the 3 dolphin blanks in mm, 26.60 x 14.40, 20.57 x 11.14 and 11.33 x 6.13
Dolphin Steel Disc Cutter Set, 3 Punches, 6-27 mm, Jewellery Making Tool
SKU: AL-V7JK-C66H

Dolphin Steel Disc Cutter Set, 3 Punches, 6-27 mm, Jewellery Making Tool

£99.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging

This disc cutter set produces clean, repeatable dolphin-shaped blanks from non-ferrous metal sheet. The set includes a solid steel die block and three corresponding punches, allowing you to create components in graduated sizes for varied jewellery and craft designs.

The three precise punch sizes are 26.60 x 14.40 mm, 20.57 x 11.13 mm, and 11.33 x 6.13 mm. Both the block and punches are made from tempered high-carbon tool steel for durability and edge retention. To use, place your sheet metal in the desired slot, insert the punch, and strike firmly with a hammer. For best results and to prolong tool life, use a cutting lubricant and work on a sturdy, non-marring surface.

Ideal for creating unique pendants, charms, or decorative inlays. The graduated sizes work well for producing matching earring and necklace sets or for layered metalwork pieces.

  • Cuts three distinct dolphin shapes from non-ferrous sheet metal.
  • Punch sizes (approx): 26.6 mm, 20.6 mm, and 11.3 mm lengths.
  • Cuts soft metals like silver, gold, and copper up to 18 gauge (1.02 mm).
  • Block and punches are crafted from tempered high-carbon tool steel.
  • Solid 76 x 76 mm (3 x 3 inch) steel block provides a stable cutting base.

Is this the right tool for you?

Best for

  • UK jewellers creating themed collections with dolphin motifs.
  • Silversmiths needing to produce consistent small-batch blanks for pendants.
  • Crafters making metal charms and embellishments for mixed-media art.
  • Model makers requiring specific curved shapes from thin brass or copper sheet.

Not for

  • Cutting ferrous metals like steel sheet (except very thin tin plate).
  • Punching metal thicker than 18 gauge (1.02 mm).
  • Use without a sturdy bench block and appropriate hammer.
  • Creating shapes other than the three supplied dolphin profiles.

How this compares

Dolphin Steel Disc Cutter... Alternatives
Material Tempered high-carbon tool steel Untempered or basic carbon steel
Punch Edges Ground sharp for clean cuts Rough or stamped edges
Block Finish Flat-ground base for stability Rough-cast or uneven base
Country of stock UK stock Overseas dispatch

You may also like
Related guides

Further reading from Toolsmith