Mosaic Pin, 2 Inch (50mm), 8mm Diameter, Brass and Copper Cross Pattern (MP-004)

This decorative mosaic pin adds a professional, custom finish to handmade items. The pin is constructed from brass and copper elements arranged in a cross pattern (MP-004), set in a black resin and encased in a brass tube. The overall diameter is approximately 8 mm.

Supplied as a 2-inch (50 mm) rod, the pin can be cut to the required thickness of your handle scales or project piece. Once epoxied in place, it can be sanded and polished flush with the surrounding material to reveal the intricate internal pattern and strengthen the handle assembly.

Ideal for custom knifemaking, restoring tool handles, or adding decorative details to small woodworking and craft projects.

Before you order

Age 18+ only. By placing this order you confirm you are 18 or over. The courier will request photo ID at delivery and return the parcel if no eligible adult is available.

Carrying in public. Under section 139 of the Criminal Justice Act 1988 (with equivalents in Scotland and Northern Ireland), it is an offence to have any bladed or sharply pointed article in a public place without good reason or lawful authority. Carry your purchase only when transporting it directly to and from a workplace, workshop, fieldcraft course, hunting estate, or other lawful use.

Use. This is a sharp working tool, not a weapon. Cut away from the body, keep fingers behind the edge, sheathe before storing, and keep out of reach of children.

Care. Wipe dry after every use and apply a thin film of mineral or camellia oil to prevent rust — high-carbon and Damascus steels will spot or patina if left damp.

Shipping. UK addresses only. Signature and photo ID required at delivery. We cannot ship to PO Boxes, parcel lockers, or addresses outside the UK.

Liability. Toolsmith Ltd accepts no responsibility for injury, damage, or legal consequences arising from the misuse, unlawful possession, or unlawful use of any tool sold on this site. The buyer is solely responsible for lawful and safe use. Full terms in our knives & axes guide.

• Supplied as a single 2-inch (50 mm) length with an 8 mm approximate diameter.
• Constructed from brass and copper rods, filled with a black resin.
• Designed for decorating and reinforcing knife handles, walking sticks, or other craft projects.
• Cut to your required length and sand flush with the handle material for a seamless finish.
• Features a central cross pattern (MP-004) for a distinctive decorative accent.