Mosaic Pin, 2 Inch (50mm), 8mm Diameter with Brass and Copper Geometric Pattern

This 8mm mosaic pin provides a decorative and structural element for custom handle work. The pin is constructed from individual brass and copper rods arranged in a complex geometric pattern, creating a unique visual effect when cut and polished.

Supplied in a 50mm (2-inch) length, the pin can be cut to the required size for your project. Once set into the handle material with epoxy, it can be sanded and polished flush with the surface, revealing the intricate internal design. The combination of metals adds visual interest and provides a strong mechanical fixing for handle scales.

Primarily used by knife makers, these pins are also excellent for adding detail to handmade tools, walking sticks, or other decorative craft applications.

Before you order

Age 18+ only. By placing this order you confirm you are 18 or over. The courier will request photo ID at delivery and return the parcel if no eligible adult is available.

Carrying in public. Under section 139 of the Criminal Justice Act 1988 (with equivalents in Scotland and Northern Ireland), it is an offence to have any bladed or sharply pointed article in a public place without good reason or lawful authority. Carry your purchase only when transporting it directly to and from a workplace, workshop, fieldcraft course, hunting estate, or other lawful use.

Use. This is a sharp working tool, not a weapon. Cut away from the body, keep fingers behind the edge, sheathe before storing, and keep out of reach of children.

Care. Wipe dry after every use and apply a thin film of mineral or camellia oil to prevent rust — high-carbon and Damascus steels will spot or patina if left damp.

Shipping. UK addresses only. Signature and photo ID required at delivery. We cannot ship to PO Boxes, parcel lockers, or addresses outside the UK.

Liability. Toolsmith Ltd accepts no responsibility for injury, damage, or legal consequences arising from the misuse, unlawful possession, or unlawful use of any tool sold on this site. The buyer is solely responsible for lawful and safe use. Full terms in our knives & axes guide.

• Supplied as a 50mm (2-inch) length with an 8mm outer diameter.
• Features a complex internal pattern of brass and copper elements.
• Ideal for securing and decorating custom knife handles and scales.
• Cut to length and sand flush for a seamless, decorative finish.
• Also suitable for walking sticks, custom tools, and other craft projects.