Hand-Forged Karambit Knife, 127mm (5") Damascus Steel Blade with Pakkawood Handle
This hand-forged karambit knife features a distinctive 'fire' patterned Damascus steel blade. The blade is constructed from 512 layers of 4340 alloy and 1075 high-carbon steel, providing a balance of toughness and edge-holding capability with a Rockwell hardness of 55-58 HRC.
The full-tang construction ensures strength and balance. Its handle is shaped from resilient black Pakkawood, accented with brass pins and a spacer for a secure and comfortable grip. The traditional karambit finger ring offers enhanced control and retention during use.
This karambit is made for knife collectors who appreciate hand-forged Damascus steel, and its curved blade also suits general workshop and outdoor tasks that call for a controlled pulling cut.
Specifications
| Blade length | 127 mm |
|---|---|
| Handle material | Pakkawood |
| Steel pattern | Pattern-welded (mixed) |
| Blade steel | Damascus pattern-welded steel (4340 + 1075), 512 layers |
| Sheath | — |
| Each piece | One-of-a-kind — pattern variation, photo is the actual piece |
Before you order
Age 18+ only. By placing this order you confirm you are 18 or over. The courier will request photo ID at delivery and return the parcel if no eligible adult is available.
Carrying in public. Under section 139 of the Criminal Justice Act 1988 (with equivalents in Scotland and Northern Ireland), it is an offence to have any bladed or sharply pointed article in a public place without good reason or lawful authority. Carry your purchase only when transporting it directly to and from a workplace, workshop, fieldcraft course, hunting estate, or other lawful use.
Use. This is a sharp working tool, not a weapon. Cut away from the body, keep fingers behind the edge, sheathe before storing, and keep out of reach of children.
Care. Wipe dry after every use and apply a thin film of mineral or camellia oil to prevent rust — high-carbon and Damascus steels will spot or patina if left damp.
Shipping. UK addresses only. Signature and photo ID required at delivery. We cannot ship to PO Boxes, parcel lockers, or addresses outside the UK.
Liability. Toolsmith Ltd accepts no responsibility for injury, damage, or legal consequences arising from the misuse, unlawful possession, or unlawful use of any tool sold on this site. The buyer is solely responsible for lawful and safe use. Full terms in our knives & axes guide.
- Blade is hand-forged from 512 layers of 4340 alloy and 1075 high-carbon steel.
- Hardened and tempered to a Rockwell hardness of 55-58 HRC for durable edge retention.
- Ergonomic handle is crafted from black Pakkawood, secured with brass pins and a spacer.
- Overall length of 241mm (9.5") with a 127mm (5") blade and 114mm (4.5") handle.
- Distinctive karambit claw shape offers a controlled grip for pulling cuts.
Is this the right tool for you?
Best for
- UK knife collectors who appreciate hand-forged Damascus steel
- Collectors of traditional karambit designs
- General workshop tasks requiring a controlled pulling cut
- Outdoor utility tasks suited to a curved blade
Not for
- Prying, chopping or other heavy rough work
- Everyday public carry without lawful authority
- Use as a weapon or for self-defence
- Unsupervised use by children or inexperienced users
How this compares
| Hand-Forged Karambit Knife, 127mm... | Alternatives | |
|---|---|---|
| Blade Steel | 512-layer Damascus (4340 alloy and 1075 high-carbon) | Basic single-alloy stainless steel |
| Hardness | 55-58 HRC Rockwell | Lower or unspecified HRC |
| Construction | Full-tang for strength and balance | Partial or rat-tail tang |
| Handle Material | Resilient Pakkawood with brass pins | Standard injection-moulded plastic |