Small Cylinder Channel 1/4" AntiClastic Pliers for Jewellery Making, Ring and Bracelet Forming Tool
£24.99
Skip to product information
SKU: S1-M8MK-N6TR
Small Cylinder Channel 1/4" AntiClastic Pliers for Jewellery Making, Ring and Bracelet Forming Tool
£24.99
In stock — dispatched from the UK
Order by 2pm UK time, Mon–Fri — we aim to dispatch same day
Free UK delivery
30-day returns
Secure checkout
UK registered
Free UK deliveryOn every order
Same-day dispatch targetOrder before 2pm UK time, Mon–Fri
30-day returnsUnused, original packaging
For jewellers and silversmiths forming anticlastic curves in narrow stock, these pliers provide the correct geometry for fine-gauge work. The ¼-inch channel supports the material on both faces, producing a clean curve without distortion. UK-stocked, with a same-day dispatch target for orders placed before 2pm UK time, Monday to Friday.
Key features
- Polished steel upper jaw with a ¼-inch wide cylinder channel.
- Fixed lower jaw features a small, domed anvil for shaping the curve.
- Brass inserts in the channel and at the anvil base help prevent marring of soft metals.
- Box-joint construction ensures jaws remain aligned under pressure.
- Fitted with cushioned, non-slip blue vinyl handle grips for comfort.
Who it's for
Primarily for UK bench jewellers, silversmiths, and metalsmiths creating contemporary anticlastic rings, bracelets, and earrings. Also suitable for model makers and fine metal artists working with non-ferrous strip and wire.
Specifications
- Jaw Material: Polished steel with brass inserts
- Channel Profile: ¼-inch (6.35mm) cylinder
- Handle Grips: Blue vinyl
Free UK delivery · Same-day dispatch target for orders before 2pm Mon–Fri · 30-day returns
Is this the right tool for you?
Best for
- UK bench jewellers forming anticlastic rings
- Silversmiths shaping anticlastic bracelets
- Metalsmiths creating anticlastic earrings
- Model makers working with non-ferrous strip
- Fine metal artists shaping non-ferrous wire
Not for
- Forming large gauge or thick metal stock
- Shaping ferrous metals or hardened steel
- General purpose bending or flattening tasks
How this compares
| Small Cylinder Channel 1/4"... | Alternatives | |
|---|---|---|
| Jaw Material | Polished steel with brass inserts | Unpolished carbon steel without inserts |
| Channel Profile | ¼-inch (6.35mm) cylinder | V-groove or flat jaw |
| Joint Type | Box-joint construction | Lap joint or rivet joint |
| Marring Prevention | Brass inserts in channel and at anvil base | No inserts, direct metal-on-metal contact |
