Hand-Forged Karambit Knife in Raindrop Damascus Steel with Red Deer Stag Handle
A hand-forged karambit, featuring a distinctive raindrop pattern blade. The steel is a composite of 512 layers of 1075 high-carbon and 4340 alloy steels, providing a durable edge with a Rockwell hardness of 55-58 HRC.
The full-tang construction ensures strength and balance. The handle is shaped from genuine Red Deer stag antler, accented with a solid brass bolster and pins for a secure and comfortable grip. The total length is approximately 229 mm (9 inches), with a 127 mm (5-inch) blade.
This karambit is made for knife collectors who appreciate hand-forged Damascus steel and natural stag antler, and its strong, curved blade also suits general workshop and outdoor tasks where a pulling cut is advantageous.
Specifications
| Blade length | 127 mm |
|---|---|
| Steel pattern | Raindrop |
| Blade steel | Damascus pattern-welded steel (4340 + 1075), 512 layers |
| Sheath | — |
| Each piece | One-of-a-kind — pattern variation, photo is the actual piece |
Before you order
Age 18+ only. By placing this order you confirm you are 18 or over. The courier will request photo ID at delivery and return the parcel if no eligible adult is available.
Carrying in public. Under section 139 of the Criminal Justice Act 1988 (with equivalents in Scotland and Northern Ireland), it is an offence to have any bladed or sharply pointed article in a public place without good reason or lawful authority. Carry your purchase only when transporting it directly to and from a workplace, workshop, fieldcraft course, hunting estate, or other lawful use.
Use. This is a sharp working tool, not a weapon. Cut away from the body, keep fingers behind the edge, sheathe before storing, and keep out of reach of children.
Care. Wipe dry after every use and apply a thin film of mineral or camellia oil to prevent rust — high-carbon and Damascus steels will spot or patina if left damp.
Shipping. UK addresses only. Signature and photo ID required at delivery. We cannot ship to PO Boxes, parcel lockers, or addresses outside the UK.
Liability. Toolsmith Ltd accepts no responsibility for injury, damage, or legal consequences arising from the misuse, unlawful possession, or unlawful use of any tool sold on this site. The buyer is solely responsible for lawful and safe use. Full terms in our knives & axes guide.
- Blade forged from 512 layers of 1075 high-carbon and 4340 alloy steels.
- Hardened and tempered to a Rockwell hardness of 55-58 HRC for durable edge retention.
- Ergonomic handle crafted from Red Deer stag antler with a solid brass bolster and pins.
- Features a 127 mm (5") curved blade and a 102 mm (4") handle for a balanced grip.
- Distinctive raindrop pattern is unique to each hand-forged knife.
Is this the right tool for you?
Best for
- UK knife collectors who appreciate hand-forged Damascus steel
- Collectors of natural stag-handled knives
- Workshop users needing a robust utility blade
- Outdoor utility tasks suited to a strong, curved blade
- Gift recipients valuing unique, artisan tools
Not for
- Everyday public carry without lawful authority
- Unsupervised use by minors or children
- Use as a weapon or for self-defence
- Leaving damp without oiling to prevent rust
How this compares
| Hand-Forged Karambit Knife in... | Alternatives | |
|---|---|---|
| Blade Steel | Hand-forged 512-layer Damascus (1075 high-carbon + 4340 alloy steel) | Machine-stamped generic stainless steel |
| Handle Material | Genuine Red Deer stag antler with brass bolster | Injection-moulded plastic or basic wood |
| Construction | Full-tang for strength and balance | Partial tang, prone to weakness |
| Hardness | 55-58 HRC Rockwell hardness | Undisclosed or inconsistent hardness |
